Hello, I recently go a Blue Microphone Yeti. I got it for the purpose of recording my voice during lLP's. The problem is that when I try to use it the computer audio becomes fuzzy and impossible to understand. Can anyone tell me what to do to fix this problem?
Answer by ClosetFuturist · Dec 31, 2012 at 08:08 PM
There could be too much gain or cross channel noise. You could try turning off the mic boost, muting other inputs and adjusting volumes. You could try updating your audio driver. It could be a compatibility issue or a bad mic but usually you can solve these things with options and adjustments.
Answer by Razor512 · Dec 31, 2012 at 10:30 PM
if you are 1.5 to 2 feet away then set the gain to 50% using the rear gain knob.
if you are within 6 inches then set the knob to 25%
after that in the audio recording, set the sample rate to 48khz
Keep in mind that since the audio is using USB, there will be some delay (thus you may have to adjust the sync by a few ms (generally 5-10ms)
Also do not speak directly into the mic unless you have a pop filter.
What USB mic should I get? 2 Answers
HELP ME PLEASE! Monitor Issue 1 Answer
iPod Touch 4G Mic Problem 0 Answers